Plug timer into grounded outlet.
To Set the Current Time: Press the HOUR button as many times as
necessary to advance the display to the correct time. Note, the
time can only be set in 30 minute intervals. The LED display will
display the hour (1-12) and on the half hour a light will illuminate
in the upper right corner, next to the number 30. To change from
AM to PM toggle 24 times, a dot will illuminate in the lower right
corner of the display next to the letters PM.
To Program the Timer: Press the PROGRAM button once, the letter
P will flash. Press the HOUR button to set the ON time. Press the
PROGRAM button again, the letter E will flash. Press the HOUR
button to set the OFF time. Press the PROGRAM button to exit
program setting mode. Press the HOUR button to review the ON/
To Connect/Operate the Timer: Plug device in to the timer and
turn the device on.
To Revise the ON/OFF Setting: Unplug the timer and plug it back
in. Repeat the programming steps above.
To Override the Timer: Press the PROGRAM button if you want
the device to turn on before the preset time, but note the device
will turn off at the preset time. For example, if the preset ON/OFF
period is 3 pm - 4 pm, users can manually press PROGRAM to
turn the device on at 2 pm, the timer will keep running until the
preset off time at 4 pm.
Suitable for use with outdoor appliances. Raintight when
mounted vertically with the receptacle facing downward. Use a
three-conductor GFCI protected outlet. Do not immerse in water.
DO NOT EXCEED RATED CAPACITY. Not for permanent installation.
Do not install or use this product for more than a 90-day period per year.
answered 9 months ago